Chasing trade partner paperwork is one of the biggest hidden costs in a GC's safety program. Paper JHAs, permits, and sign-in sheets have to be collected, checked, scanned, filed, and found again later. BiltOn is designed to capture that paperwork from trade partners at the source, so your safety team spends its time on the site. For COOs, this is a margin and labor efficiency issue. For safety and operations leaders, it is a field execution issue.
This article puts a number on the chase. It is written for the safety director who knows the binder problem firsthand and the CFO who has never seen it on a budget line. For background on the JHA itself, see our practical guide to job hazard analysis.
Trade partner paperwork: The JHAs, pre-task plans, permits, sign-ins, certifications, and COIs that subcontractors produce and the GC has to collect and keep.
Capture at the source: Recording a document digitally when the trade partner creates it, instead of collecting paper and re-entering it later.
Safety Intelligence: Verified field data turned into signals leaders can act on before a problem becomes a loss.
Predictive Safety Management: The operating model that uses verified leading indicators to act early instead of counting failures later.
Where does trade partner paperwork actually go wrong?
It goes wrong in the handoffs. The sub fills out a form, someone carries it to the trailer, someone else scans it, and a third person has to find it when an inspector or carrier asks.
Dwayne Jenkins, Senior Director of Environmental, Health and Safety for MasTec's building group, has seen the pattern at several GCs. The sub goes back to the office, uploads a PTP, puts it in the wrong folder, labels it incorrectly, or scans it sideways. "Someone's still wasting time on both sides," he says.
The common failure points look like this:
Paper JHAs: Filled out on the tailgate, collected at the end of the day, scanned on Friday.
Permits: Signed on paper, posted at the work area, and missing when the job closes out.
Sign-in sheets: Illegible names, missing employers, and no way to confirm who was really there.
Certifications and COIs: Expired documents found only after someone asks for them.
Sub portals and email: Documents uploaded to the wrong place, in the wrong format.
Our article on why pre-task plans fail on jobsites covers how this plays out with PTPs specifically.
How many hours does the paperwork chase really cost?
It costs more than most budgets show, because the hours are spread across many people and never land on one line. Industry research puts non-productive time at more than a third of the week, and safety teams carry a large share of the document chase.
The Autodesk and FMI Construction Disconnected report found construction professionals spend 35% of their time, more than 14 hours a week, on non-productive activities. Those include looking for project data and information, resolving conflicts, and dealing with mistakes and rework.
Manual transfer makes it worse. The JBKnowledge ConTech Report found 51.3% of respondents still manually transfer data between apps that do not integrate.
Here is a simple way to estimate the wage cost for your own team. The Bureau of Labor Statistics lists a median annual wage of $83,910 for occupational health and safety specialists as of May 2024. That works out to about $40 an hour.
Admin hours per safety manager per week | Annual wage cost per manager | For 20 safety managers |
|---|---|---|
5 hours | About $10,500 | About $210,000 |
10 hours | About $21,000 | About $420,000 |
15 hours | About $31,500 | About $630,000 |
This example covers wages only, at the BLS median with 52 working weeks. It leaves out benefits, overhead, and the cost of the field time you lose. Your trade partners carry a matching cost on their side, which eventually shows up in their bids. Those hours are a labor efficiency problem and a margin problem. Across a portfolio, small delays add up fast.

What does paper cost beyond the hours?
Paper costs you data quality, visibility, and defensibility. A document you cannot find, read, or trust might as well not exist when you need it.
Bad data has a measurable price. Autodesk and FMI's Harnessing the Data Advantage in Construction estimated bad data cost the global construction industry $1.848 trillion in 2020. The same report found that one-third of poor decisions were caused by bad data.
Visibility suffers too. When JHAs sit in a binder until Friday, nobody can see on Tuesday that a crew skipped its hazard review. Our guide to leading vs lagging safety indicators explains why that delay matters.
Defensibility is the last cost. After an incident, the question is whether you can prove what was planned, who signed, and when. Read claims defensibility: building a site record that holds up for what that record needs.
Do regulators accept scanned paper records?
In some places, they do not. New York City is the clearest example, and OSHA rules still require records you can produce on request.
NYC's Buildings Bulletin 2024-007 allows electronic site safety documents, but it says scans of paper documents or editable Word or Excel files do not count. The records must be tamper proof, validate signatures, show when they were created, and be kept up to seven years after the job ends.
Our guides to NYC DOB digital record-keeping for general contractors and the DOB approval of digital record-keeping cover the details.
Federal rules matter too. OSHA's recordkeeping retention rule (1904.33) requires employers to keep OSHA 300 logs and related forms for five years after the end of the calendar year they cover. Scanning is not the same as verifying. AI document verification and OCR data extraction check what a document says, so compliance rests on real data.
Why is trade partner paperwork the GC's problem?
It is the GC's problem because the GC controls the site. On a multi-employer jobsite, the GC is expected to take reasonable steps to prevent and detect hazards created by others.
OSHA's multi-employer citation policy describes the controlling employer's duty to exercise reasonable care in preventing and detecting violations on site. A missing or late JHA from a sub is a gap in your own program.
The JHA itself is supposed to be a team effort. OSHA's job hazard analysis guide (OSHA 3071) says it is very important to involve employees in the hazard analysis process. It also recommends reviewing a JHA after an injury or close call.
Paper makes both of those harder. A form filled out to satisfy the GC is not the same as a crew talking through the hazards of the day. Consistency is the other cost. Without standardized safety workflows, each site collects paperwork its own way, and cross-site operational consistency suffers.
Is all that paperwork making anyone safer?
Often it is not, and that may be the biggest hidden cost. When the goal becomes collecting the form, the conversation the form was meant to start gets lost.
Kenneth Seal, deputy director of the International Finishing Trades Institute, put it bluntly in the 2026 Dodge and CPWR safety management study. He said safety is too often treated as a documentation exercise. Many firms build programs to satisfy general contractors or regulators, checking boxes without asking whether supervisors are equipped to teach.
That is a warning for GCs. If your paperwork process mostly measures whether a sub turned in a form, you are rewarding box-checking. Our article on closing the compliance-to-conformance gap explains why 100% PTP completion can still fail.
The same study profiles Blach Construction, which manages orientations, JHAs, PTPs, permits, inspections, and corrective actions in one platform accessible from mobile devices. Blach uses that visibility to spot trends and confirm expectations are carried out in practice, not just on paper.
Crew involvement is the point of the exercise. OSHA's guidance on worker participation calls for workers to be involved in all aspects of a safety program, including contractor and temporary workers. Less time chasing forms leaves more time for those conversations.

How do GCs capture trade partner paperwork at the source?
They make the digital version easier than paper for the crew. When signing takes a text message and no app download, trade partners stop needing to be chased.
BiltOn captures JHAs and PTPs from trade partners at the source. Workers sign by SMS or browser with no app download, and every signature is tied to a verified worker profile. The record syncs two ways with Procore and Autodesk, so nobody re-enters it.
The same approach covers the rest of the stack. BiltOn handles orientations, digital permits, observations, inspections, incident reports, and worker certification and COI tracking. Digital JHAs and PTPs give every site the same standard. QR code self-onboarding and zero double entry into Procore keep field execution moving.
Paper workflow | Captured at the source |
|---|---|
JHA filled out on paper and scanned later | JHA signed on the worker's phone by SMS or browser |
Sign-in sheet with illegible names | Signature tied to a verified worker profile |
Permit posted at the work area | Digital permit with a timestamped record |
Expired COI found during an audit | Certification and COI tracking with reminders |
Records re-entered into Procore | Two-way sync with Procore and Autodesk |
Customer proof point: Hunter Roberts. Within six months, pre-shift plan completion rose from 67% to 98% across the portfolio, and observation close-out time dropped from 9 days to 4.2 days (client-reported). Hunter Roberts case study
Customer proof point: Lettire Construction. Lettire cut self-onboarding for a 30-worker crew from about two hours to minutes using phone-based signing (client-reported). "If your safety guy is stuck onboarding instead of walking the site, that's a gap in your coverage," says Greg Stewart. Lettire case study

What should each leader own?
Each leader owns a piece of the fix. The paperwork chase ends when the field, finance, and IT agree on one way to capture records.
For VPs of Safety and Safety Directors: Log admin hours for one week, then pick the top paperwork task to move to the source first. Pair this with the pre-task plan template every crew will actually use. Make consistent, standardized workflows the default on every site.
For COOs and VPs of Operations: Set one standard for trade partner paperwork across every project, written into subcontract requirements. Protect margin and labor efficiency across the portfolio.
For CFOs and heads of Risk: Put the admin hours on a budget line, and use the BiltOn ROI calculator to size the savings.
For IT and Innovation leaders: Connect trade partner records to Procore or Autodesk. See how Procore and Autodesk customers use BiltOn.
Ready to stop chasing paper? Book a walkthrough at BiltOn demo.
Executive takeaway
Trade partner paperwork breaks down in the handoffs between the crew, the trailer, and the file.
Construction professionals spend more than 14 hours a week on non-productive work, and safety teams carry much of the document chase.
At the BLS median wage, 10 admin hours a week costs about $21,000 a year per safety manager in wages alone.
Paper also costs data quality, visibility, and defensibility, and NYC does not accept scans as electronic records.
Capturing paperwork at the source, with no app download, ends the chase.
Capture paperwork once, at the source, to protect margin and keep field execution consistent.
Frequently asked questions
1. How much time do safety teams spend on paperwork?
It varies by company, but construction professionals spend more than 14 hours a week on non-productive activities, according to Autodesk and FMI. Log your own team's hours for one week to get a baseline.
2. Does NYC accept scanned safety documents?
Not in New York City. Buildings Bulletin 2024-007 says scans of paper documents do not comply. Electronic records must be tamper proof and validate signatures.
3. How long do OSHA records need to be kept?
OSHA 300 logs and related forms must be kept for five years after the end of the calendar year they cover, under 29 CFR 1904.33.
4. Should workers be involved in writing JHAs?
Yes, they should. OSHA's JHA guide says it is very important to involve employees in the hazard analysis process.
5. How does BiltOn reduce trade partner paperwork?
BiltOn captures JHAs and PTPs from trade partners at the source, with SMS or browser signing and no app download. Learn more in what is Predictive Safety Management.
Works Cited
Autodesk and FMI. (2021). Harnessing the data advantage in construction
Autodesk and FMI. (2018). Construction disconnected
Bureau of Labor Statistics. (2025). Occupational health and safety specialists and technicians: Occupational outlook handbook
Dodge Construction Network and CPWR. (2026). Safety management in the construction industry SmartMarket report
JBKnowledge. (2021). The ConTech report
New York City Department of Buildings. (2024). Buildings Bulletin 2024-007: Electronic site safety documents
Occupational Safety and Health Administration. (2002). Job hazard analysis (OSHA 3071)
Occupational Safety and Health Administration. (1999). Multi-employer citation policy (CPL 02-00-124)
Occupational Safety and Health Administration. (n.d.). Retention and updating (29 CFR 1904.33)
Occupational Safety and Health Administration. (n.d.). Recommended practices for safety and health programs: Worker participation
Stay Informed
Get the latest safety intelligence insights.
Join safety leaders and risk professionals who rely on BiltOn's newsletter for industry insights, research, and best practices.
